XS 327

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET PART A | SDS CLICK HERE

SAFETY DATA SHEET PART B | SDS CLICK HERE

XS-327 is a specially formulated two component, moisture-cure, high solids hybrid water based polyurethane coating designed for application over completed concrete surfaces. XS 327 is a penetrating, UV stable, minimal color enhancing sealer, available in both matte and gloss finishes. At 64% solids (varies upon reduction rate) and 25 g/L VOC this high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance.

Xtreme Series 327 is ideally suited for both commercial and residential settings applied upon concrete countertops, fireplace surrounds, shower panels, floor tiles, wall panels, and all Xtreme Series products. Like some other sealers, XS-327 becomes food safe upon curing. It is stain resistant to most household chemicals and culinary items, and is heat resistant to 300°F (149°C). XS 327 is distinctive in its ability to be touched up or repaired.

XS 327 Quick Facts

Sheen | Semi-Gloss & Matte

Components | Dual (2)

Packaging | 40 oz. kit

Mix Ratio | 3:2     (3-parts A to 2-parts B)

Maximum Pot Life | 30 Minutes

Ready for Recoat | Dry to touch

Recoat Window | After 12 hours sanding required

Light Duty Use | 24 hours

Full Cure | 7 days

Does Xtreme Series 327 Have Any Temperature Or Air Quality Issues?

Do not allow product to freeze, whether in shipping or storage. Part A of product that has frozen will separate and curdle; Part B does not change in appearance. However, product that has frozen, should not be used.

Apply in ambient and surface temperatures ranging above 60°F (16°C) and below 90°F (32°C) and that will remain within ranges for at least 12 hours. As XS-327 is a moisture-cure product, the use of more water in dilution rates may be required in those areas with very
dry climates.