Super 20

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET | SDS CLICK HERE

Super 20 is a single-component, 20% acrylic solids, 600 g/L, color enhancing, high gloss sealer developed for concrete or any cement based product. It is vapor permeable, yet reduces the penetration of fluids into the surface. Super-20 will enhance the beauty, improve stain and abrasion resistance, and provide UV protection for driveways, garage floors, patios, brick pavers, walkways, pool decks, stucco, and concrete block.

Super20 can be used as a first coat seal or a recoat. In either case surface preparation is essential for proper product performance. When using as a recoat or refresh the surface should be cleaned with a pressure washer and SCR (see SCR TDS). When applying this concrete sealer it can be rolled out or sprayed from a solvent-resistant sprayer.

Super 20 Quick Facts

Packaging | 1-gal & 5-gal

% Solid | 20%

VOC | 600 g/L

Coverage | 180-200 sq. ft. p/gal

Super 20 Test Data

Test                                    ASTM  (if applicable)                            Results
Blush                                 4 hr. dry / 18 hr. immersion                 No blush
Adhesion                          D-3359
Dry Concrete                                                                                       Excellent
Wet Concrete                                                                                      Excellent
QUV                                   G-53                                                           250 hr. [no blistering, no yellowing]
Abrasion resistance                                                                          12.5 grams loss
Block resistance             D-4946                                                       Excellent
Heat stability                  D-1849                                                       Excellent
Film formation                                                                                   Passed
Water absorption                                                                              2.4 g /m³
Pencil hardness             D-3363                                                       HB-H
Hot tire pick-up                                                                                 Passed*

*Under extreme circumstances delaminating could occur. All tire manufacturers were not tested. Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking.