DK 400

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET Part-A | SDS CLICK HERE

SAFETY DATA SHEET Part-B | SDS CLICK HERE

DK 400 is a solvent-based clear high gloss floor polyurethane is a 2 component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, concrete overlays, or as a clear top finish coat on epoxy systems. The high-gloss clear top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable.

When dealing with protective coatings for concrete, which sealer you choose can vary wildly based upon the arena that the sealer is going to be applied in, the different chemicals it will be exposed to, as well as the amount of foot traffic or abrasion it will endure. In the case of choosing a sealer for an interior concrete application or overlay, there are few coatings that offer the balance of cost-efficiency and resilience as solvent polyurethane sealers. Dura-Kote Polyurethane (DK 400) clear topcoat has been formulated to be one of the most mechanically and chemically resistant coatings available on the market today.

Typical Areas Dura-Kote 400 is Used

DK 400 is excellent for both commercial and residential surfaces. It has been used to protect concrete overlays, epoxy metallics, epoxy flake floors, and stained concrete. Which is why if you have a commercial floor, retail floor, restaurant or bar, hotel or resort, DK 400 is the protective polyurethane floor coating you want.

DK 400 Quick Facts

Components | 2 (A+B)

Packaging | 1-Gal Kit & 5-Gal Kit

% Solid | 51%

VOC | 435 g/L

Pot Life | Approx 60-minutes

Recoat Window | 6-8 hours (18+ in low temps)

Full Cure | 5-7 days (Up-to-14 in low temps)

Appearance (Cured) | Clear High Gloss