DK 180

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET PART-A | SDS CLICK HERE

SAFETY DATA SHEET PART-B | SDS CLICK HERE

DK 180 (formerly Dura-Kote PFC-180) is a specially formulated 80% solids hybrid solvent based polyaspartic coating. Unlike many polyaspartic’s, it has a user-friendly pot life of approximately 20 minutes and the ability to create a moderate build (6 ½ mil) single coat top coat. Turnaround time for a floor may be as little as 6 – 8 hours. Epoxy flakes may be covered in a single pass. DK 180 provides a low VOC (<200 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss, moderate build wear surface.

The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient
floor is desired.

Avoid application on extremely hot days or during wet, foggy weather. Basic rules include:

• Apply with ambient and surface temperatures ranging above 32°F (0°C) and below 90°F (32°C) and that will remain
  within ranges for at least 12 hours following application. Note: as temperature falls below 60°F (10°C) part B will
  “thicken”. To empty part B from container will require moving into a heated space until the viscosity allows product
  to pour.
• Surface temperature must be a minimum 5°F (3°C) above dew point.
• Relative humidity should be below 75%.

80% Solid Polyaspartic Cure Rates

Cure Rates @ 80°F (27°C) 
Dry to touch = 2 hrs.
Light traffic = 4 – 6 hrs.
Heavy Traffic = 24 hrs.
Full cure = 1 – 2 days

Cure Rates @ 40°F (4°C)
Dry to touch = 6 – 8 hrs.
Light traffic = 24 hrs.
Heavy Traffic = 3 days
Full cure = 7 day

DK 180 Quick Facts

Components | 2 (A+B)

Type | Solvent Based Polyaspartic

Mix Ratio | 3:1 (3-parts A to 1-part B)

Packaging | 1-Gal Kit or 4-Gal Kit

% Solids | 80%

VOC | <200 g/L

Coverage Rate | 150-200 sq. ft. per/gal