HS 200

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET | SDS CLICK HERE

HS 200 Series is Surecrete’s most advanced premium quality concrete sealer, solvent-based silane acrylic sealer. HS200 Series is a premium exterior clear stamped concrete sealer that is designed for exterior concrete applications that need attributes such as: slower evaporating solvents, efflorescence reducers, crystal clear finish, and can protect against freeze-thaw elements. HS-200 is ideal for vehicular areas such as driveways, golf cart paths, and other areas where a high gloss clear durable sealer is required. It can also be used in heavy foot traffic surfaces such as walkways, sidewalks, and porticos.

HS 200 Series is available in a standard 600 g/L and a low VOC 400g/L version. When you choose this premium concrete sealer, you will notice the difference immediately. The slower evaporating solvents help to give the applicator more time to apply before it becomes tacky and begins to create “spider webs”. This is essential as temperatures are getting warmer every year. The silane used helps reduce efflorescence, by managing moisture migration. It also delivers additional protection, when the acrylic film wears down over time. HS-200 uses the highest quality acrylics to give a crystal clear, gloss finish on all exterior concrete surfaces.

When applying HS-200, you should do the following:

1. Avoid application on extremely cold or hot days or during wet, foggy weather.
2. Apply with ambient and surface temperatures ranging above 50°F (10°C) and below 90°F (32°C) and that will remain within
   ranges for at least 24 hours following application.
3. Do not apply outside if precipitation is forecast within 24 hours of application.
4. Substrate must be dry throughout all steps.

HS200 Quick Facts

Packaging | 1-Gal & 5-Gal
Appearance (cured) | Clear gloss
Appearance (wet) | Clear
Water Resistance | Excellent, beads water
Mechanical Stability | Excellent
Light Stability | Excellent
Solids | 20%
Diluent | Hydrocarbons
Storage Stability | 2 years (unopened container)
Odor | Solvent
Application Temperature | 50°F – 90°F (10° – 32°C)
Nano Technology | Silane Formulation
VOC content | 600 g/L

Testing Data for HS-200

TESTING ASTM D-1308
Transmission Fluid | Resistant
Gasoline | Remove Immediately
Formula 409 | Resistant
Motor Oil | Resistant
Brake Fluid | Remove immediately