XS Packing Additive

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET PART A (Matte) | SDS CLICK HERE

XS Packing Additive is a thickening agent designed for the Xtreme Series mixes. Although it can be used in all mix designs for a thickening effect, it is most effective when used in conjunction with the XS Face and XS PreCast. Our Packing Additive can also be used in the XS Precast in “back up” coats. Especially when XS Precast has been laced with fiber addition for doing large flats where a “pourable backer” mix is desired. In many cases extra fiber will be added to XS Precast
when casting these areas, that same mix can then be thickened for vertical use using Packing Additive.

Use the Packing additive for a “Pressed Look”. The Pressed Look will have a surface that will leave voids that will be later filled with XS Slurry. Experimentation with mix consistency and the amount of pressure applied to the concrete during the pressing phase will determine the void size and consistency.

PACKING ADDITIVE QUICK FACTS

Packaging | 1 lb. Jar

Used With | XS PreCast, D-FRC PreCast, XS Face, D-FRC Face

Mix Ratio |

• Face: 2 capfuls
• Precast: 1 – 2 capfuls